Centrifugal Barrel Finishing Machine Manufacturer Shares Polish

  • General customers pay great attention to the selection and installation of automatic polishing machines, because these affect the future use of the polishing machine. Today the Centrifugal Barrel Finishing Machinemanufacturer summarizes some of the experience for the installer.

    1. Firstly, it is necessary to analyze the soil pressure resistance, water level, etc. at the installation site, and must meet the installation and use requirements of the polishing machine to determine the installation plan.

    2. When installing the polishing machine, try to clean the ground so that the machine is not easy to clean.

    3. Installation should avoid high-voltage transmission lines and avoid interference with the electronic polishing machine.

    4. Need to have independent power supply to avoid sharing with other high-power appliances.

    5 Polishing machine installation requires a relatively large installation site, and it is important to have enough operating space.

    6. It is rainy, humid, and the polishing machine installed in the saline and alkali areas cannot be placed on ordinary mud. Otherwise, many problems such as ventilation and drainage should be considered.

    7. The polishing machine should not be installed on the tuyere, otherwise the polishing machine will not work well when it is windy.

    In fact, the choice of the location of the automatic polishing machine is very important, only the correct choice of installation location, in order to ensure the life of the polishing machine.
    information about centrifugal barrel finishing machine : https://www.zhongyun-machine.com/product/